While it took awhile for the factory in Europe to produce the springs we did get one of the first sets of racing/lowering springs for the 451 smart fortwo. The install was a little tricky but well worth it as the outcome is simply amazing. The smart not only looks amazing with the lower stance it drives like a completely different car.
Yes a completely different car as the once very annoying shifts that bobbed the ca front and back is virtually eliminated. The shifts are a lot more stable and feel even quicker as there is no body movement with the stiff racing springs. While these stiff springs does mean you feel the road a lot more, my passengers haven’t been to thrilled with the change but for a the driver its so much more fun to be able to control the car even more.
Installing the lowering springs was hard as we were doing it without the shop manual, but for you it is going to be easy as we’ve spent the hours figuring out how to disable the smart and put everything back together so you don’t have to.
It took us just over 2 hours to do the smart install but to repeat what we did would probably only take an hour as the tricky front part is explained below.
Here is the process how to install the new springs:
The springs are labeled front/back so you know which goes where, they are also labeled up and down. If in doubt you can also tell by looking at the factory springs as they share the same patterns.
1) Hoist the car up so that all 4 wheels are off the ground.
2) Remove all 4 wheels
3) Remove the front hood flap
4) Remove the top part of the cowl, this will require you to remove the side corner triangles and the cowl will clip off.
(step #4 is what was the hold up for us as if you don’t remove the top of the cowl you will not get at the holes to remove the strut tower nut)
5) Remove the nut from the top of the strut tower, best to use impact wrench as the struts tend to slip.
6) Disconnect the brake line and tire pressure sensor as well as the other suspension bolts.
7) Remove the strut tower and then put the strut tower in a vice to remove the factory springs.
8) Replace the factory springs with the new racing springs, but leave the bump stop in as factory.
9) Do the same for the other side of the front and then reverse the process to reattach the front suspension.
10) The rear springs are a lot easier as you just need to remove the bolt holding the bottom of the rear strut which frees up the springs.
11) Using a crowbar release the pressure on the springs and remove them.
12) Using the crowbar again release pressure and insert the new racing springs.
13) Replace the lower strut tower bolt and then repeat steps 10 – 13 for the other side.
14) Replace the 4 tires and then lower the smart back to the ground, torque up the nuts on the wheels and stand back and admire the results.
The springs that I bought came directly from the factory in Europe as lucky me/us the factory is owned by someone who’s son is a smart fan and is why I was able to get the springs even before they officially hit the market.
My contact is willing to sell springs direct to smart fans and the cost is $100 per set, yes that’s right $100 as they come directly from the factory. Drop me a message is you are interested and as soon as my contact is able and willing to I’ll post his details directly here.
Comment
- Comment by carlos on November 3, 2008 at 7:22pm
- can someone let me know if they are really going to be selling these springs to us? im very interested. drop me a line
- Comment by Lourdes on October 17, 2008 at 2:51am
- By the color, my hubby belives they are Sprint springs, though not sure. The H&R are gray and the Eibach-USA are black. They look really nice on the car : )
- Comment by smart 1 on October 12, 2008 at 4:21pm
- What Brand springs are you using.
- Comment by har4444 on October 2, 2008 at 3:47pm
- Could someone tell me what is the brand of these lower springs? Please?????
- Comment by Andrew on August 21, 2008 at 1:42pm
- Maybe I missed it but is there an actual measurement in the drop. It looks really low! The HR springs if I remember correctly were something like a 24 mm drop. How do these compare?
- Comment by matt on August 2, 2008 at 3:48pm
- you are able to get us lowering springs for a 100$, i live in canada what price could you do for me, drop me a line and let me know, i have not owned a car that i have not lowered, so right now i feel like im ridding a donkey. and also i was wondering what type of struts you are running?
- Comment by David on July 28, 2008 at 8:44pm
- Looks Great put me on the list for a set. Did you change out just the springs or did you change shocks and springs?
- Comment by sammy on July 3, 2008 at 11:47am
-
i love the look just one question my smart has 17" will these springs work 4 me with out any rubbing issues ????????? please get back 2 me asap i will pay 100 bucks right away
1-917-337-2179
- Comment by 24kinmotion on June 6, 2008 at 8:27pm
- IS the spring set coming?
- Comment by Mike Cheung on February 10, 2008 at 5:02am
- I love the look! I will definitely put a set on my car once I get it. I lowered my volvo and everyone laughed....I can only imagine the reaction when friends and family find out I plan on lowering a smart car...
You need to be a member of 451 smart fortwo to add comments!
Join 451 smart fortwo